The easy way to drain coolant 

"4muddyfeet - bare knuckle with an EZ30" (4muddyfeet) 01/16/2016 at 06:37 • Filed to: Wasserpumpe

5

15

Smoggi - powered by 3 cylinders > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 06:50

0

Who needs a damn waterpump anyway? Just hook this thing up permanently and don’t bother replacing the broken pump.

4muddyfeet - bare knuckle with an EZ30 > Smoggi - powered by 3 cylinders 01/16/2016 at 07:09

0

Well there's the problem, I've now got the pump off and it's fine I think. Just trying to access the last bolt but I can see the blades and they look as good as new :/

pip bip - choose Corrour > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 07:21

0

why not just remove bottom rad hose , or are you going to reuse the coolant?

4muddyfeet - bare knuckle with an EZ30 > pip bip - choose Corrour 01/16/2016 at 07:25

1

That’s 11 litres of coolant coming out very quickly. I’m not sure I’m fast enough with a bucket.

shop-teacher > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 09:14

1

Nice rig!

Brickman > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 09:26

0

I use a shop vac and tape a small hose

JawzX2, Boost Addict. 1.6t, 2.7tt, 4.2t > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 10:08

1

that rotary hammer is a little overkill for running that pump isn’t it?

Alfalfa > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 10:12

1

I need this. My Volvo doesn’t have a coolant plug, I have to drop the pan when I change it. And I don’t have a garage.

4muddyfeet - bare knuckle with an EZ30 > JawzX2, Boost Addict. 1.6t, 2.7tt, 4.2t 01/16/2016 at 10:12

0

It’s the only only one I’ve got with variable speed :)

XJDano > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 10:44

0

Does it have a regular drill chuck or did you have to modify a SDS bit?

4muddyfeet - bare knuckle with an EZ30 > XJDano 01/16/2016 at 15:15

0

It's SDS+ but you can buy 13mm chucks for them which just slot in as per usual.

4muddyfeet - bare knuckle with an EZ30 > Brickman 01/16/2016 at 15:18

0

I wish I had a shop vac. I’m stuck with a detailers vac which does the minor jobs, but otherwise I’m stuck with a good ‘ol dustpan and brush.

4muddyfeet - bare knuckle with an EZ30 > shop-teacher 01/16/2016 at 15:21

0

Notice the little block hanging by a wire? That’s my redneck trigger pull so I can just jam it in and let it run.

shop-teacher > 4muddyfeet - bare knuckle with an EZ30 01/16/2016 at 17:09

0

Ha! Even better!

gmporschenut also a fan of hondas > 4muddyfeet - bare knuckle with an EZ30 01/17/2016 at 10:53

0